Link to
Primers, Topcoats, Chassis Coatings, PVC & Plastics, Special products,
Rapidpaint offer a full range of 1 pack and 2 pack CV primers. Our primers are suitable for a variety of CV applications. Whether it’s a chassis or high value specialist vehicle we have a primer system to suit you needs.
| Speedbuild 3 1Pack |
A superior high build, high solids, anti-corrosive primer/undercoat for use in commercial vehicle finishing and re-finish. This product combines a long wet edge time with quick drying and excellent adhesion with superior sandability. Speedbuild 3 is easy and versatile in use. It can be applied over most surfaces encountered in a commercial vehicle finishing, including G.R.P. bare steel and shotblasted steel. Available in Grey, Black, White, Red, Buff, Blue. Also available in green and yellow to order. (5L Pack) |
|
| HS Rapidbuild 2K Primer |
An ultra high quality primer for high performance CV repairs. HS Rapidbuild 2K Primer can be used as a first choice primer filler/surfacer under all H.M.G. 2 Pack topcoat systems. HS Rapidbuild 2K Primer contains high levels of Zinc Phosphate and gives excellent corrosion and impact resistance. HS Rapidbuild 2K Primer can be used as a surfacer when applied as a thin coat on previously primed or painted substrates. Colour – Beige. (5L Pack) |
|
| Polykote AMC 2K Primer |
AMC Primer may be top-coated without flatting, wet on wet or may be de-nibbed. It has very low sinkage properties with excellent flatting properties. By using this primer, the ultimate gloss finish is possible with typical compliant topcoats. AMC Primer may be colour tinted to improve topcoat coverage by adding up to 10% XSC98 colour. Suppied in Off White. (Composite Pack 5L) |
|
| Synthetic BDX Primer |
A high build, easy sandable, anti-corrosion, primer system for use with all CV Synthetic topcoats. BDX Primer is available in light grey or charcoal colours and is an excellent basecoat over existing finishes of virtually all types after adequate preparation. BDX Primer combines high build and excellent sandability after a short drying period together with excellent application and scratch filling properties. For satisfactory adhesion to Aluminium and other alloys, the use of a Two Pack Etch Primer is required. (Pack 1L or 5L) |
|
| TAP Primer |
A clear sealer/adhesion promoter which gives excellent hold out, or lack of sinkage, when applying 2K topcoats over existing original finish on all commercial transport work. TAP Primer is applied over the original finish acting as an adhesion promoter between old & new coats. TAP Primer may also be used 'wet on wet' with HMG 2K topcoats & may be tinted with 2K topcoat colours up to a maximum of 10%. (Pack 5L) |
|
| U Plas Primer |
Designed to promote adhesion to plastics. The primer can be brush, spray or dip applied, it is quick air drying and can be overcoated with a wide variety of conventional topcoat systems. (Pack 1L) |
|
| High Build Ct Primer |
High build coating offering outstanding adhesion, moisture resistance and corrosion protection due to incorporation of modified Zinc Phosphate. Designed for airless or conventional application to chassis, steel fabrication etc. It is easy to apply without fear of runs or sags at high wet film thickness. High Build Ct Primer can be used as a single pack or two pack primer when mixed with AIF249 Hardener. When used as a two pack, the general properties of the product are enhanced. (5L Pack) |
|
| Washfiller Etch Primer |
A high build 2 Pack Etch Primer Filler, designed for use in both original painting and repair operations. Washfiller offers excellent adhesion and build, it is simple to use and offers fast through hardening and good protection against corrosion. Washfiller can be air dried or stoved @ up to 150C. The effective high build quality of the system enables up to 20 microns to be applied with each cross coat, giving good exterior durability for up to 12 months. Due to the high level of chromate anti-corrosive pigment, Washfiller is an excellent and versatile blast primer system. (Pack 5L) |
|
| Polyester Spray Filler KF8 |
2 component heavy bodied spray or brush applied filler. It is used for the deep filling of substrates of various types. Polyester Spray Filler KF8 is used extensively in the automotive re-finishing field, where its ultra high build and quick curing make it ideal for use in repair situations. Polyester Spray Filler KF8 will resist temperatures up to 120 ºC. (Pack 5L) |
|
| HB Zinc Phosphate Primers 35 Line |
High build primer for chassis. Spray application. 75 microns in single coat. Range of colours. Fast drying. 35-1 & 35-2 contain Micaceous Iron Oxide. (5L Pack) |
|
| Nexa Primecoat |
Primecoat, etch primer undercoat, combines the benefits of acid etch for adhesion with good filling properties. Mainly for use over bare metal its build and neutral colour can cut out the need for an undercoat on new work. A standard activator is available for general-purpose use and slow and extra slow activators are available for use over larger surface areas and/or in hot conditions. | |
| Nexa BuildPrimer 2 |
Anti-Corrosive Primer has excellent anti-corrosive properties making it an ideal primer for new steel chassis. It has been specially designed for application by HVLP spray and is formulated to give a maximum application VOC level of 540 g/l. It can be used under Nexa Autocolor Commercial Transport 2-pack topcoats. |
anti graffiti coatings | commercial vehicle paints | industrial floor paint midlands | industrial paint | industrial paint suppliers | industrial paint west midlands | industrial paints | joseph mason paints | protective coatings west midlands | specialist coatings west midlands | Site Map
Useful Resources: SEO Companies | Business Directory | Industrial Drying Ovens